Froggysfog
877.376.4499

MON - FRI 9:00-5:00 CST

View Cart

Look Solutions Viper 2.6 Fog Machine

SKU: LS-VI-0200

In stock

The Viper 2.6 features very powerful output, simple handling and the possibility to connect an external fan.
  • DMX as standard
  • Internal timer
  • Very powerful output, continuous possible
  • Fogging output adjustable in steps of 1% from 0 - 99%
  • Easy handling

In stock

MSRP: $2,075.00

Our Price: $2,075.00
The Viper 2.6 features very powerful output, simple handling and the possibility to connect an external fan.
  • DMX as standard
  • Internal timer
  • Very powerful output, continuous possible
  • Fogging output adjustable in steps of 1% from 0 - 99%
  • Easy handling

Normally Ships in 1-2 Days

OR

Description

The Viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technik and power. Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.



Features
• Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
• Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper 2.6 to be used in both small and large locations.
• DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel.
If an external fan is connected to the machine it can be controlled via DMX as well. The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (not inlcuded). This connection is done with 3pin-XLR- plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run.
• Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.
• Connector for external fan
An external fan with max. 800 watts can be connected to the Viper 2.6.
Safety
The Viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
An optional hanging yoke complete with a collecting tray for fluid drips can be attached.



Technical data

Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230V/50Hz
Warm up time: approx. 7 min.
Fluid consumption: at max. output 240 ml/min. - at continuous output 240 ml/min. 70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 25 m
Fogging time: 60,000 CFM at full, at < 50% output continuous output
external Fan: max. 800 Watt
Air quantity: adjustable in 99 steps
Control: DMX 512, 0 - 10 V analog Stand-alone-Mode Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat Pump/Thermal switch
Dimensions (L x W x H): 52 x 23 x 25 cm
Weight without bottle: approx. 12 kg


Optional Accessories Available
•Hanging set
(Hanging yoke complete with collection tray)
•Ducting adaptor •XLR-remote •Radio remote •Case

Write Your Own Review

You're reviewing: Look Solutions Viper 2.6 Fog Machine

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price