| |
| Jem Roadie Compact | Specifications | |
| Martin's industry-standard Jem Roadie X-Stream is now available in a high-output, compact version. |
| | | | Features | | - | Output and density level control | | - | Continuous output | | - | 2500 m3/min fog output | | - | Integrated high velocity fan | | - | 2 x 1500 W heat exchanger | | - | 9 min heat-up time | | - | For vertical or horizontal effect projection | | - | 9.5 liter fluid capacity | | - | Different fluid options for different applications | | - | Low fluid sensing | | - | Onboard DMX, 3 & 5 pin | | - | Pre-programmed stand-alone macros | | - | On-board control panel | | - | Optional multifunctional remote control | | |
Physical |
| Length: 800 mm (31.5 in.) |
| Width: 500 mm (19.7 in.) |
| Height: 600 mm (23.6 in.) |
| Dry weight: 80 kg (176.4 lbs.) |
Performance |
| Max. fog output (approx.): 2500 m3 per minute |
| Max. operating time at full output (approx.): 90 minutes |
| Operating time: Continuous, automatic level adjustment |
| Warm-up time (approx.): 9 minutes |
Control and Programming |
| Control options: Onboard control panel, DMX |
| Compatible remote controls: For limited control |
| DMX channels: 2 (output and fan) |
| Protocol: USITT DMX512/1990 |
Construction |
| Housing: Steel & aluminum |
| Heat exchanger: 2 x 1500 W, direct thermal protection |
Fluid System |
| Fluid pump: Oscillating piston, high pressure X2 |
| Onboard fluid capacity: 9.5 l |
| Fluid consumption at peak output: 220 ml per minute |
Installation |
| Orientation: Floor mount (Horizontal or vertical) or flying kit |
Connections |
| Remote control: 3-pin locking XLR |
| DMX data: 3-pin and 5-pin XLR sockets |
| Power cable entry: Hard-wired |
Electrical |
| AC power: 208 V 60 Hz / 220 - 240 V 50 Hz |
| Main fuse (208-240 V power): Onboard 16 A Breaker |
Typical Power and Current |
| 208 V, 60 Hz: 2450 W, 12.7 A |
| 220 V, 50 Hz: 2745 W, 12.5 A |
| 230 V, 50 Hz: 3000 W, 13.04 A |
| 240 V, 50 Hz: 3267 W, 13.6 A |
| Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
Thermal |
| Maximum ambient temperature (Ta max.): 40 C (104 F) |
| Exterior surface temperature, steady state: 50 C (122 F) |
| Max. nozzle temperature: 200 C (392 F) |
Approvals |
 |
| EU safety: EN 50 081-1, EN 50 082-1 |
| EU safety: EN 60 335-1 (1995) |
Included Items |
| |
| |
| Hard wired mains cable 2 m (6.6 ft.) | | |
| |
Accessories |
| Pro Smoke Studio (DX Mix) fluid | | |
| Pro Smoke Super (ZR Mix) fluid | | |
| Pro Smoke High Density (SP Mix) fluid | | |
| Pro Steam Simulation (AA) fluid | | |
| Pro Haze (Haze mix) fluid | | |
| Regular DJ (DJ mix) fluid | | |
| |
| |
| |
Ordering Information |
| Jem Roadie Compact | P/N: 92230500 | |
2007-2008 Martin Professional A/S. Specifications subject to change without notice
|
