Look Solutions Viper S Fog Machine

Ask a Question

Out of stock

MSRP $1,090.00

Our Price: $890.00

Be the first to review this product

SKU: LS-VI-0271

Out of stock

The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses.
  • DMX as standard
  • Control panel / LED-display and simple symbols for an easy operation
  • Very powerful output, continuous possible
  • Fogging output adjustable in steps of 1% from 0 - 99%
  • Easy handling


This fog generator with 650 W and an powerful output of approx. 8 meter perfectly completes the Viper range.
The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses. The Viper S is characterised by a low power and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output. Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternatve to bigger machines.

• Finest adjustments of the output

Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room.

• DMX 512 as standard

The Viper S can be controlled via DMX 512. The connec- tion is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged.The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (not included). The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustment of the pump is done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted pump level. A radio remote is also available as an option.

• Internal timer

With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.

• Control panel

The control panel with LED display and simple symbols allow an easy operation. It also protects the control but- tons against dirt.


Procedure: Vaporizing fog generator
Power requirement: 650 Watt
Voltage: 230 V/50 Hz or 120 V/60 Hz
Heat-up time approx.: 7 minutes
Fog output: adjustable in 99 steps (1% steps)
Fluid tank capacity: 750 ml (25.3 oz)
Fluid consumption: 60 ml/min. at max. output (2 oz) 15 ml/min. at cont. output (0.5 oz)
Output projection: max. 8 m (26.2 ft)
Fog time: at 100% approx. 35 seconds at <50% continuous output
Temperature control: Microprocessor controlled
Overheating protection: Heater block with thermostat Pump with temperature switch
Control: DMX 512 0-10 V analog
Stand alone
internal timer
Dimensions (L x B x H) 35 x 18 x 19 cm (13.7 x 7.1 x 7.5 in)
Weight without canister 5.4 kg (11.9 lb)

Radio remote (optional, not included)

Frequently Asked Questions

No Questions


Write Your Own Review

How do you rate this product? *