Features
The JEM Hazer Pro is a top of the range water-based haze machine designed for the highly demanding professional market. Its ability to produce exceptionally fine atmospheric haze in a short period of time while operating at low noise levels makes it an ideal choice for rental houses, medium to large shows, theatres, studios, clubs, bars, cruise ships, theme parks and more.
Robust yet small and lightweight, the JEM Hazer Pro is capable of dispersing an even, continuous haze with superior optical clarity and reflectivity, the perfect small-particle haze for highlighting today’s highly defined light beams. The highly efficient JEM C-Plus Haze fluid was developed for the JEM Hazer Pro and a full reservoir can yield up to 65-hours of run time before refilling is necessary.
The JEM Hazer Pro features a battery-powered automatic shutdown system that purges the trackless heat exchanger system, thus preventing clogging, reducing maintenance and extending product life. Robust control options allow the machine to be controlled independently, remotely or with DMX featuring RDM compatibility.
Finest haze production in its class
Programmable fast access control keys
Actors' Equity/Broadway League Approved.
Continuous effect output
Water-based fluid provides dense particles and even haze
Sealed fluid system with quick-connect fittings
2.5 l fluid reservoir - 10.5hours on full output
User-friendly on-board digital control panel
Pre-programmed 'silent' mode
Independent variable haze and fan control
DMX Control with RDM
Road-worthy industrial design
Lightweight and small footprint
Optional Flying Kit and Digital Remote Control
Battery powered automatic shutdown system - prevents clogging
Downloads
Specifications
Physical
- Length: 565 mm (22.3 in.)
- Width: 271 mm (10.7 in.)
- Height: 298 mm (11.8 in.)
- Height with rigging kit: 294 mm (11.6 in.)
- Dry weight: 15 kg (33.1 lbs.)
- Filled weight: 17.5 kg (38.6 lbs.)
Performance
- Coverage volume: 5500 m3 (194,231 ft3) per minute
- Operating time with 2.5 l fluid (minimum/maximum): 10.5/65 hours
- Operating time: Continuous
- Ready time: 6 minutes
- Ambient noise: Silent mode
Control & Programming
- Control options: Digital control panel, programmable fast access keys, DMX, optional digital remote control, master/slave link mode
- Control parameters: Continuous or timer-controlled output
- Haze and fan: Independent variable output, 0-100%
- DMX channels: 3 (Haze, Fan, Control)
- Self cleaning cycle: Battery powered automatic shutdown, manually engaged, or DMX
- DMX compliance: ANSI E1.11 - USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20 RDM
Construction
- Housing: Steel and aluminum
- Color: Black
- Heat exchanger: 600 W trackless heat exchanger, thermally protected
- Blower fan: Integrated, 200-2500 RPM
- Fluid pump: Oscillating piston, high pressure
- Fluid management: Fluid out sensing, sealed for transportation
- Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
Installation
- Mounting: Standing or optional flying kit
- Orientation: Up to +/- 30° from horizontal
- Clearance around machine: 100 mm (4.0 in.)
Connections
- AC power: Neutrik PowerCon
- DMX, link mode in/out: 3-pin and 5-pin locking XLR
- Remote control: 3-pin locking XLR
- Firmware: AVR socket
Electric
- AC power: 100-130 V, 50/60 Hz
- Main fuse: 10 AT (slow blow), 125 V
- Typical power and current: 675 W, 6 A*
- *Measurements made at nominal voltage. Allow for a deviation of +/- 10%
Thermal
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min): 5° C (41° F)
- Exterior surface temperature, steady state: 30° C (86° F)
- Maximum nozzle temperature: 290° C (554° F)
Approvals
- EU EMC: EN 61000-6-3:2001
- EU safety: EN 60 335-1+A15, EN 62233
- EU Immunity: EN 61000-6-1
- US safety (pending): UL 998
- Canadian Safety (pending): CSA C22.2 No. 104-01
- Australia/NZ: C-Tick N4241